Unless otherwise defined, indoor and outdoor areas are made available for stand set-up operations with the following timetable:
Halls 2-3-4-5 and outdoor Area A from 07:00 a.m. to 8:30 p.m., from 15 to 25 September 2017; Stand installation and decoration must be completed by and no later than 8:30 p.m. on 25/09/2017. On 26 September 2017 from 7:00 until 12:30 (half past Midday) access to the pavilions and area mentioned above will be permitted to exhibitors only to see their booths and/or eventually to accommodate their samples. On the eve of the exhibition, stand installation, construction and/or material handling operations will not be permitted and access will be denied to all stand contractor companies.
Halls 8-10-11-12 from 07:00 a.m. to 8:30 p.m., from 20 to 25 September 2017; on 26 September 2017 from 7:00 a.m. to 4:00 p.m.;
Outdoor Areas B and D from 2:00 p.m. to 8:30 p.m. on 20 September 2017; from 7:00 a.m. to 4:00 p.m., from 21 to 25 September 2017. On 26 September 2017 from 7:00 a.m. to 4:00 p.m.;
Halls 6-7-9 and outdoor Area C from 7:00 a.m. on 21 September, until 4:00 p.m. on 26 September 2017, non-stop (24 hours/day).
In Halls no 2, 3, 4, 5 and in outdoor Area A, stand installation and set-ups must be completed by and not beyond 8:30 p.m. on 25/09/2017.
In Halls no 6, 7, 8, 9, 10, 11, 12 and outdoor Area B, C and D, stand installation and set-ups must be completed by and no later than 4:00 p.m. on 26/09/2017
Areas are available for dismantling operations from 1 to 3 October from 7:00 a.m. to 8:30 p.m.; on 4 October 2017, from 7:00 to 12:30 p.m. (half past Midday).
Stands must absolutely be dismantled - except for other agreements - by 12:30 p.m. on 4 October 2017. Otherwise, the Organiser reserves the right to disassemble the structures and store goods, without any responsibility/liability and at the expense, risk and hazard of the infringing party.
All items not specified in this document shall be referred to the dispositions of the Technical Regulations and to Art. 8 of the Marmomac General Regulations.